oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0599 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if187.5m-65a 187.5mhz if saw filter 65.52 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if187.5m-65a january 2011 rev a 187.5 mhz if saw filter 65.52 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=56nh, l2=5.6nh output l2=5.6nh, l4=56nh source/load impedance 50
oscilent part number 813-if187.5m-65a january 2011 rev a 187.5 mhz if saw filter 65.52 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -20 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 187.5 - insertion loss at fo db - 28.50 31.00 amplitude ripple variation(fo 32.4mhz) db p-p - 0.58 1.0 group delay variation(fo 32.4mhz) nsec - 13 35 absolute delay at fo sec - 0.90 - temperature coefficient ppm/c - -72 - bandwidth at ?1.0 db mhz 65.40 65.52 - bandwidth at ?3.0 db mhz - 66.68 - bandwidth at ?40.0 db mhz - 71.0 72.0 ultimate rejection 10mhz ~ 147.5mhz db 48 50 - 227.5mhz ~ 540mhz db 48 50 - 540mhz~ 600mhz db 43 45 -
oscilent part number 813-if187.5m-65a january 2011 rev a 187.5 mhz if saw filter 65.52 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db wide band
oscilent part number 813-if187.5m-65a january 2011 rev a 187.5 mhz if saw filter 65.52 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo32.4mhz group delay variation fo32.4mhz smith chart
oscilent part number 813-if187.5m-65a january 2011 rev a 187.5 mhz if saw filter 65.52 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|